Uşak Üniversitesi Makine Mühendisliği

 

I. Yesilyurt, H. Gursoy, “Estimation of elastic and modal parameters in composites using vibration analysis”, accepted Journal of Vbiration and Control, 2013,pp 1-16

 

H. Ozturk,   I. Yesilyurt, and M. Sabuncu. “Detection and Advancement Monitoring of Distributed Pitting Failure in Gears”  accepted Journal of Nondestructive Evaluation, June 2010, Volume 29, Issue 2, pp 63-73

 

H. Ozturk,  I. Yesilyurt, and M. Sabuncu. “Investigation of Effectiveness of Some Vibration-Based Techniques in Early Detection of Real-Time Fatigue Failure in Gears” accepted for publication in Shock and Vibration, Vol. , pp. -, 2009.

 

K. Mazanoglu,  I. Yesilyurt, and M. Sabuncu. “Vibration analysis of multiple-cracked non-uniform beams” accepted for publication in Journal of Sound and Vibration, Vol. 320(4-5), pp. 977-989, 2009.

 

H. Ozturk,  I. Yesilyurt, and M. Sabuncu. “Early Detection of Pitting Damage in Gears using Mean Frequency of Scalogram” accepted for publication in Journal of Vibration and Control, Vol. 14(4), pp. 469-484, 2008.

 

I Yesilyurt and H. Ozturk. “Tool Condition Monitoring in Milling Using Vibration Analysis” International Journal of Production Research, Vol. 45(4), pp. 1013-1028, 2007.

 

H. Ozturk,  I. Yesilyurt, and M. Sabuncu. “In-plane stability analysis of non-uniform cross-sectioned curved beams” Journal of Sound and Vibration, Vol. (296/1-2), pp. 277-291, 2006.

 

F. Gu, I. Yesilyurt, Y. Li, G. Harris and A. Ball. “An Investigation of the Effects of Measurement Noise in the Use of Instantaneous Angular Speed for Machine Diagnosis” Mechanical Systems and Signal Processing, Vol. (20/6), pp. 1444-1460, 2006.

I. Yesilyurt. “End Mill Breakage Detection Using Mean Frequency Analysis of Scalogram” International Journal of Machine Tools and Manufacture, Vol. (46/3-4), pp. 450-458, 2006.

 

I. Yesilyurt. “The Application of the Conditional Moment Analysis to Gearbox Fault Detection – A Comparative Study using the Spectrogram and Scalogram” NDT&E International, Vol. (37/4), pp. 309-320, 2004.

 

I. Yesilyurt. “Fault Detection and Location in Gears by the Smoothed Instantaneous Power Spectrum Distribution” NDT&E International, Vol. (36/7), pp. 535-342, 2003.

 

I. Yesilyurt, F. Gu, and A. D. Ball. “Gear Tooth Stiffness Reduction Measurement Using Modal Analysis and its Use in Wear Fault Severity Assessment of Spur Gears” NDT&E International, Vol. (36/5), pp. 357-372, 2003.

 

I. Yesilyurt and A. D. Ball. “An Advanced Approach to Bending Fatigue Detection in Spur Gears” Maintenance & Asset Management October 1997, Vol. 12, No. 4, pp. 28-32.

 

Asi, O., “Cracks in a powder vibrating sieve disc”, Engineering Failure Analysis,13, 32-43 (2006).

 

Asi, O., “Failure of a stud bolt in a ring spinning frame textile machine”, Engineering Failure Analysis, 13, 963-970 ( 2006).

 

Asi, O.,  “Failure of a diesel engine injector nozzle by cavitation damage”, Engineering Failure Analysis, 13, 1126-1133 (2006). 

 

Asi, O., “Fatigue failure of a helical gear in a gearbox”, Engineering Failure  Analysis,  13, 1116-1125 (2006).

 

Asi, O., “Failure analysis of a crankshaft made from ductile cast iron”, Engineering Failure Analysis, 13, 1260-1267 (2006). 

 

Asi, O., “Fatigue failure of a rear axle shaft of an automobile”. Engineering Failure Analysis, 13, 1293-1302 (2006).

 

Tercan, M.,  O. Asi ve A. Aktaş. “Determination of the critical crack length of notched weft-knitted glass fiber variable width composite plates”, Composite Structures, 77, 111-119 ( 2007).

 

Tercan M., O. Asi ve A. Aktaş, “An experimental investigation of the bearing strength of weft-knitted 1 × 1 rib glass fiber composites”, Composite  Structures, 78, 392-396 (2007). 

 

Asi O., A. Ç. Can, J. Pineault ve M. Belassel, “The relationship between case depth and bending fatigue strength of gas carburized SAE 8620 steel”. Surface and Coatings Technology, 201, 5979-5987(2007).

 

Tercan M., O. Asi, M. E. Yüksekkaya ve A. Aktaş. “Comparison of tensile properties of weft-knit 1 × 1 rib glass/epoxy composites with a different location of layers”, Materials & Design,  28, 2172-2176 (2007)

 

Asi O., A. Ç. Can, J. Pineault ve M. Belassel, The effect of high temperature gas carburizing on bending fatigue strength of SAE 8620 steel 

Materials & Design, Volume 30, Issue 5, May 2009, Pages 1792-1797

 

Asi, O.  An experimental study on the bearing strength behavior of Al2O3 particle filled glass fiber reinforced epoxy composites pinned joints. Composite Structures, Volume 92, Issue 2, January 2010, Pages 354-363

 

Asi, O Effect of different woven linear densities on the bearing strength behaviour of glass fiber reinforced epoxy composites pinned joint. Composite Structures, Volume 90, Issue 1, September 2009, Pages 43-52

 

Osman Asi.  Mechanical Properties of Glass-Fiber Reinforced Epoxy Composites Filled with Al 2O3 Particles Journal of Reinforced Plastics and Composites 28: 2861-2867 (2009). 

 

Osman Asi. Experimental fatigue fracture analysis of a diesel engine crankshaft used in a truck.International Journal of Heavy Vehicle Systems . 16 (4) 403-411 (2009)

 

Asi, Osman; Aktas, Alaattin; Tercan, Mevluet; Yüksekkaya Mehmet Emin.  Effect of Knitting Tightness on Mechanical Properties of Weft-knit Glass Fiber Reinforced Epoxy Composites. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES Volume: 29 Issue: 1 Pages: 86-93 (JAN 2010)

 

Osman Asi. Experimental surface contact fatigue failure analysis of a hypoid pinion used in differential system of a truck. Int. J. Heavy Vehicle Systems, Vol. 18, No. 1, pp. 104-114, 2011

 

Gun, H., “Isotropic damage analysis of frictional contact problems using quadratic meshless boundary element method,” International Journal of Mechanical Sciences, 80, 102-108 (2014).

 

Gun, H. and Gao, X.W., “Analysis of frictional contact problems for functionally graded materials using BEM,” Engineering Analysis with Boundary Elements, 38, 1-7 (2014).

 

Gun, H. and Kose G., “Prediction of longitudinal modulus of aligned discontinuous fiber-reinforced composites using boundary element method,” Science and Engineering of Composite Materials, 21(2), 219-221 (2014).

 

Gun, H. and Ekici, H., “ Computing transverse elasticity modulus of composites using boundary integral equation method,” Science and Engineering of Composite Materials , 20;(2), 175-178 (2013).

 

Gun, H., Caliskan ,S. and Gun, D. A.,  “ a Meshless formulation of the Euler-Bernoulli theory for large deformations of fabrics,” Textile Research journal , 81;(10), 1075-1080 (2011).

 

Gun, H., “Two-dimensional Boundary Element Analysis of Creep Continuum Damage Problems with Plastic Effects,” Computational Materials Science, 41, 322-329 (2008).

 

Gun, H., “Boundary Element Method for Prediction of Hardness of Dentin from Punch-Nano-Indentation Test,” Computer Methods and Programs in Biomedicine,86, 227-231 (2007).

 

Gun, H., “3D Boundary Element Analysis of Creep Continuum Damage Mechanics Problems,” Engineering Analysis with Boundary Element,29, 749-755 (2005).

 

Gun, H., “An Effective BE Algorithm for 3D Elastoplastic Frictional Contact Problems,” Engineering Analysis with Boundary Elements, 28, 859-867 (2004).

 

Gun, H., “Elasto-plastic Static Stress Analysis of 3D  Contact Problems with Friction by Using the Boundary Element Method,” Engineering Analysis with Boundary Elements, 28, 779-790 (2004).

 

 Gun, H., “Boundary Element Analysis of 3-D Elasto-Plastic Contact Problems with Friction,” Computers and Structures, 82, 555-566 (2004).

 

Evaluation of the Performance of a Hydrogen Enriched Combustion System for Ceramic Sector

O.M. Ayna, M.Şahin SCI; International Journal of Hydrogen Energy ;2015

 

Performance analysis of a novel concentrating photovoltaic combined system

C.Kandilli SCI; Energy Conversion and Management ;2013

 

Assessment of the optimum operation conditions of a plate heat exchanger for waste heat recovery in textile industry C.Kandilli, A.Koçlu SCI; Renewable and Sustainable Energy Reviews ;2011

 

Transmission performance of fibre optic bundle for solar lighting C.Kandilli, A.K.Turkoglu, K. Ulgen SCI; International Journal of Energy Research ;2009

 

Review and Modelling the Systems of Transmission Concentrated Solar Energy via Optical Fibres, C.Kandilli, K.Ulgen SCI; Renewable and Sustainable Energy Reviews ;2009

 

Solar Illumination and Estimating Daylight Availability of Global Solar Irradiance

C.Kandilli, K.Ulgen SCI; Energy Sources Part A-Recovery Utilization and Environmental Effects ;2008

 

Exergetic assessment of transmission concentrated solar energy systems via optical fibres for building applications, C.Kandilli, K.Ulgen, A.Hepbasli SCI; Energy and Buildings ;2008

 

Caliskan H., 2015, Thermodynamic and environmental analyses of biomass, solar and electrical energy options based building heating applications, Renewable & Sustainable Energy Reviews, Vol. 43, pp. 1016-1034 (DOI: 10.1016/j.rser.2014.11.094).

 

Caliskan H., 2015, Novel Approaches to Exergy and Economy Based Enhanced Environmental Analyses for Energy Systems, Energy Conversion and Management, Vol. 89, pp. 156–161. (http://dx.doi.org/10.1016/j.enconman.2014.09.067).

 

Caliskan H., 2014, Energy, Exergy, Thermoeconomic and Sustainability Analyses of a Building Heating System with a Combi-Boiler, International Journal of Exergy, Vol. 14 (2), pp. 244-273.

 

Caliskan H., 2013, Energetic and exergetic comparison of the human body for the summer season, Energy Conversion and Management, Vol. 76, pp. 169-176. (http://dx.doi.org/10.1016/j.enconman.2013.07.045).

 

Caliskan, H., Dincer, I., Hepbasli, A., 2013, Thermoeconomic analysis of a building energy system integrated with energy storage, Energy Conversion and Management, Vol. 76, pp. 274-281. (http://dx.doi.org/10.1016/j.enconman.2013.07.044).

 

Caliskan, H., Dincer, I., Hepbasli, A., 2013, Exergoeconomic and environmental impact analyses of a renewable energy based hydrogen production system, International Journal of Hydrogen Energy, Vol. 38, pp. 6104-6111. (http://dx.doi.org/10.1016/j.ijhydene.2013.01.069).

 

Caliskan, H., Dincer, I., Hepbasli, A., 2013, Letter to Editor: Rebuttal to “Some comments to the paper “Energy, exergy and sustainability analyses of hybrid renewable energy based hydrogen and electricity production and storage systems: Modeling and case study””, Applied Thermal Engineering, Vol. 59, pp. 480-489. (doi: http://dx.doi.org/10.1016/j.applthermaleng.2013.03.065)

 

Caliskan, H., Dincer, I., Hepbasli, A., 2013, Energy, exergy and sustainability analyses of hybrid renewable energy based hydrogen and electricity production and storage systems: Modeling and case study, Applied Thermal Engineering, Vol:61, pp. 784-798, (http://dx.doi.org/10.1016/j.applthermaleng.2012.04.026).

 

Caliskan, H., Dincer, I., Hepbasli, A., 2012, Energy and exergy analyses of combined thermochemical and sensible thermal energy storage systems for building heating applications, Energy and Buildings, Vol. 48, pp. 103–111. (doi:10.1016/j.enbuild.2012.01.017).

 

Caliskan, H., Dincer, I., Hepbasli, A., 2012, Thermodynamic analyses and assessments of various thermal energy storage systems for buildings, Energy Conversion and Management, Vol:62, pp. 109-122. (http://dx.doi.org/10.1016/j.enconman.2012.03.024).

 

Caliskan, H., Dincer, I., Hepbasli, A., 2012, Exergoeconomic, enviroeconomic and sustainability analyses of a novel air cooler, Energy and Buildings, Vol. 55, pp. 747-756. (doi:10.1016/j.enbuild.2012.03.024).

 

Caliskan, H., Dincer, I., Hepbasli, A., 2012, A comparative study on energetic, exergetic and environmental performance assessments of novel M-Cycle based air coolers for buildings, Energy Conversion and Management, Vol:56, pp. 69-79. (doi:10.1016/j.enconman.2011.11.007).

 

Caliskan, H., Dincer, I., Hepbasli, A., 2011, Exergetic and sustainability performance comparison of novel and conventional air cooling systems for building applications, Energy and Buildings, Vol. 43, pp. 1461-1472. (doi:10.1016/j.enbuild.2011.02.006).

 

Caliskan, H., Hepbasli, A., Dincer, I., Maisotsenko, V., 2011, Thermodynamic performance assessment of a novel air cooling cycle: Maisotsenko cycle, International Journal of Refrigeration, Vol. 34, Issue: 4, pp. 980-990. (doi:10.1016/j.ijrefrig.2011.02.001).

 

Caliskan, H., Hepbasli, A., Dincer, I., 2011, Exergy analysis and sustainability assessment of a solar-ground based heat pump with thermal energy storage, Journal of Solar Energy Engineering-ASME, Vol. 133(1), pp.011005-(1-8). (DOI: 10.1115/1.4003040).

 

Caliskan, H., Hepbasli, A., 2011, Exergetic cost analysis and sustainability assessment of an internal combustion engine, International Journal of Exergy, Vol. 8, No. 3, pp. 310-324. (DOI: 10.1504/IJEX.2011.039793).

 

Caliskan, H., Hepbasli, A., 2010, Energy and exergy analyses of ice rink buildings at varying reference temperatures, Energy and Buildings, Vol. 42, pp. 1418-1425. (doi:10.1016/j.enbuild.2010.03.011).

 

Caliskan, H., Hepbasli, A., 2010, Energy and exergy prices of various energy sources along with their CO2 equivalents, Energy Policy, Vol. 38, pp. 3468–3481. (doi:10.1016/j.enpol.2010.02.020).

 

Caliskan, H., Hepbasli, A., 2010, Exergetic analysis and assessment of industrial furnaces, Journal of Energy Resources Technology-ASME, June 2010, Vol. 132(012001) pp. 1-7. (DOI: 10.1115/1.4001144).

 

Caliskan, H., Tat, M.E., Hepbasli, A., 2010, A review on exergetic analysis and assessment of various types of engines, International Journal of Exergy, Vol. 7, No. 3, pp. 287–310. (DOI: 10.1504/IJEX.2010.031986).

 

Caliskan, H., Tat, M.E., Hepbasli, A., Van Gerpen, J.H., 2010, Exergy analyses of engines fueled with biodiesel from high-oleic soybeans based on experimental values, International Journal of Exergy, Vol. 7, No. 1, pp. 20–36. (DOI: 10.1504/IJEX.2010.029612).

 

Caliskan, H., Tat, M.E., Hepbasli, A., 2009, Performance assessment of an internal combustion engine at varying dead (reference) state temperatures, Applied Thermal Engineering, Vol. 29, 3431–3436. (doi:10.1016/j.applthermaleng.2009.05.021).

 

Balcıoğlu, H.E. Aktaş, M., Strength enhancement of notched composite pultruded shafts by repairing with woven and knitting fabrics, Journal of Composite Materials, (In Press).

 

Aktaş, M. Balcıoğlu H.E., Buckling behavior of pultruded composite beams with circular cutouts, Steel and Composite Structures, 17(4), 359-370, 2014.

 

Aktaş, A. Aktaş, M. Turan, F., Impact and post impact (CAI) behavior of stitched woven-knit hybrid composites, Composite Structures, 116, 243-253, 2014.

 

Balcıoğlu, H.E. Aktaş, M., An investigation on lateral buckling of laminated composites with delaminations, Indian Journal of Engineering and Materials Sciences, 20: 367-375, 2013.

 

Aktaş, M. Balcıoğlu, H.E. Külahlı G., Strain rate effects on tensile and compressive behaviour of woven-knitting glass/epoxy composites, Advanced Composites Letters, 22(1): 13-19, 2013.

 

Aktas, M. Balcıoğlu, H.E. Aktaş, A. Türker, E. Deniz, M.E., Impact and Post Impact Behavior of Layer Fabric Composites, Composite Structures, 94(9): 2809-2818, 2012.


Oluşturma: 25 Haziran 2018